Ammunition receiver

In daily shooting training or execution, firearms may become misfired or stuck, which can easily lead to injury accidents. There is not enough space for gun inspection in the arsenal, which affects the safety of gun operations. Our company has developed a safe ammunition harvester, which consists of a cylinder, protective sleeve, cylinder core, bracket, etc.

The simplified version is made of seamless stainless steel tube with a length of 792mm, an outer diameter of 170mm, and an inner diameter of 150mm. The bottom of the tube is welded and sealed with a 20mm stainless steel plate, and the end is sealed with an 8mm stainless steel flange screw. The upper screw is equipped with a rubber sleeve with an inner diameter of 148mm and a thickness of 28mm. There is a middle 80mm gun hole in the center of the steel plate and rubber sleeve; The internal structure of the cylinder consists of one layer of 20mm rubber plate and six cylinder cores from top to bottom. The outer shell of the cylinder core is made of plastic material and filled with cushioning material. The cylinder core is 96mm high and has an outer diameter of 44mm. A foldable bracket and locking device are installed on the outer side of the cylinder.

System height: 790+2mm,

Wall thickness: 3mm,

Bottom thickness of cylinder: 8mm,

Number of copper cores: 6,

Material of cylinder body: 304 stainless steel pipe,

Copper core material: high-density polymer material,

Material of the barrel mouth: rubber.